HomeGrinding Mill Servers › Three Ring Medium speed Micro-powder Mill Machine Price

Three Ring Medium speed Micro-powder Mill Machine Price

Three Ring Medium speed Micro-powder Mill Machine Price

The Three Ring Medium speed Micro-powder Mill Machine is using the latest technological advances in grinding equipment, and is widely used in grinding barite, limestone, kaolin, ceram, and slag, etc. Three-rings and medium-speed micro powder mill is not different from other micro powder mill. The three-rings and the rolling pressure ration of Medium-speed micro powder mill is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree . When a certain degree of wear of roller and ring of the Three-rings and Medium-speed micro powder is effected, our ultrafine mill is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, The stable output and fineness of ultrafine mill are ensured.
 

Features:

1.High Efficiency

Under the same finished final size and the same motor power, the capacity of Carbon black grinding mill machine with CE/ISO is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

2.Long lifecycle of spare parts

The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.

3.High safety and reliability

As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

4.High fineness, flexible adjustment

The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.

5.Environment-friendly

The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.

6.Advanced intelligent speed control device

Convenient adjusting, more uniform particle size.

Application:

Three Ring Medium speed Micro-powder Mill Machine with CE/ISO is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
 

Working Principle:

The main bearing and each dial are driven by electromotor of main equipment through reducer, and numbers of rings and rolls which are rolling in the ring channels are driven by dial through plunger. After being crushed by hammer crusher, the big materials become small ones and they are sent to the storage bin by elevator. The electromagnetic vibrating feeder sends them to the middle of first dial evenly; the materials will be driven to the edge of dial by centrifugal force, and fall into the ring channels and are pressed, crushed and ground by the grinding rings and rolls. Then the materials fall into the second and third ring and crushed and ground. The high pressure centrifugal blower inhales air from the outside and blow the materials which are ground in the third ring to powder Separator. The rotating turbo in the powder Separator makes the coarse materials return to the mill and reground, while the fineness mixes with the air and be drawn to the cyclone and be discharged from the discharging valve which is in the bottom of it. The air which mixed with very little fineness are purified by impulse dust catcher and discharged by blower and muffler.
 

Technical Parameters:
 

Model

HGM80

HGM90

HGM100

HGM100A

HGM125

Ring Diameter(mm)

800

930

1035

1035

1300

Ring Number (PCS)

3

3-4

3

4

4

Roller Number(PCS)

21

24-32

27

34-36

40-44

Main Shaft Speed (r. p. min)

230-240

200-220

180-200

180-200

135-155

Input Size (mm)

≤20

Finished Size (um)

5-47(325-2500)

Capacity (t/h)

0.5-4.5

0.6-6.5

0.7-7

1-8.5

1.5-12

Outlet Size L*W*H (m)

13.9*4*6.2

14.7*4.8*7.2

18*4.6*8.6

18*4.6*8.6

14*9*10.25

Motor powder (KW)

145-165

185-204

263

263-290

380-430

INQUIRY

if you have any questions,plese contact us,we will reply with in 24 hours!

* You Need:
* Your Name:
* Your Email:
* Country:
* Telephone:
* questions:

INQUIRY

if you have any questions,plese contact us,we will reply with in 24 hours!

Contact US

For product information and pricing, Chat with sales agent: or Email Us: xsm@xsmcrusher.com
Tel: +86-21-33756878
Fax:+86-21-33908325

Get Price

Price of latest products

Share :