HomeAsia › Used Artificial Sand Making Machine Price in India

Used Artificial Sand Making Machine Price in India

Sand Maker is high-performance equipment for sand making and shaping, is researched and produced by our corporation through absorbing the advanced technology from Germany, and has achieved world advanced standards. This equipment has two types: rock-on-rock and rock-on-iron. Sand yield of “rock-on-iron” type is higher by 10-20% than that of “rock-on-rock” type.
 

Features:

1. Advanced double-pump oil lubrication system guarante shaft bearing lower temperature increase, longer life time, more reliable operation.

2. Main shaft is equipped with imported precision rolling bearing. It makes main shaft work stable, lengthen maintenance cycle, increase productivity.

3. Hydraulic lifting mechanism of upper cover can move away the cover easily, which saves man power during maintenance.

4. Over-vibration device is equipped. There will be alarm when vibration surpasses a stipulated figure. It will stop the machine, in order to protect it.

5. Special dust-proof design for main shaft bearing fully avoid dust entering bearing lubrication part, which make sure the machine work normally.

6. Special feed opening structure make it possible that center feeding and ring feeding comes together, in order to meet requriement of different stones. In addition, this equipment can not only crush stone, but also iron.

7. Shape of material-throughing device is better designed, which improve the utilization ratio.
 

Working Principle:

Stone less than 60mm enters sand making machine though conveyor belt. Stone is crushed by hitting other stones. Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several times, finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported to sand washing machine, however overlarge material will go back to sand maker to be recrushed. Output sizes can be made according to customers requirement. If input size is larger than the designed size, other crushing equipment will be necessary.

Technical Parameters:
 

Model VSI7611 VSI8518 VSI9526 VSI1140
Capacity (t/h) Center and Ring feeding 120-180 200-260 300-380 450-520
Center feeding 60-90 100-130 150-190 225-260
Max Feed Size (mm) Soft material <35 <40 <45 <50
Hard material <30 <35 <40 <45
Rotation speed (r/min) 1700-1890 1520-1690 1360-1510 1180-1310
Power for double motor (kW) 110-150 180-220 264-320 400-440
Overall Dimension L×W×H (mm) 3700×2150×2100 4140×2280×2425 4560×2447×2778 5000×2700×3300
Weight (t) 11.8 14.5 17.8 25.6
Power Source 380v 50Hz
Vibrating Sensor Inspect scope: 0.1-20mm/s adjusted continuously
Lubrication hydraulic pressure station Power for double oil pump 2×0.31kW
Safety To make sure the supply of the oil with double oil pump; stop working without oil or hydraulic pressure; temperature falls when the water cools; start the motor by heating it in winter.
Power for oil box heater 2 kW

Inquiry

If you have any questions,plese contact us,we will reply with in 24 hours!

* You Need:
* Your Name:
* Your Email:
* Country:
* Telephone:
* questions:

Get Price

Price of latest products

Share :