HomeSand Making Production Line › River gravel sand making machine quote in india

River gravel sand making machine quote in india

River gravel sand making machine quote in india

This series design and manufacture with optimization by introducing advanced technology at home and abroad. The River gravel sand making machine is operated stably and reliably, easy to maintain, and has high efficiency for breaking. The fineness product is in bubic shape,with lower content of needle-like particles, especially suitable for plastic of stone material, and for production of sand with high ratio The River gravel sand making machine is the new type efficient stone crushing equipment for crushing midsize and fine stone, the granularity of raw material is 6—20mm and the final product size can be 0—5mm,.The River gravel sand making machine is widely used in crushing rock, abrasive, refractory, cement clinker, quartzite ,iron ore, concrete aggregate, etc. especially for making building sand and paving sand.

Features:

1.Special dust-proof design for main shaft bearing fully avoid dust entering bearing lubrication part, which make sure the machine work normally.

2. Special feed opening structure makes it possible that center feeding and ring feeding comes together, in order to meet requirement of different stones. In addition, this equipment can not only crush stone, but also iron.

3.Shape of material-through device is better designed, which improve the utilization ratio.

4. Optimized arrangement design of wear resistant materials increase the service life of the machine by over 40%, thus decrease the cost by over 40%.
 

Application:

Brittle hardness and grind materials such as ore, concrete, limestone, cobble, granite, metallurgy slag Secondary, tertiary and fine crushing stages or coarse grinding stage or shaped aggregate stage. Artificial sand making, concrete, beneficiation and grinding used in modern construction, irrigation works, building and mining industrials.
 

Working Principle:

The raw material enters into the Sand Making Machine PCL-600 through feed hopper and is devided into two parts by material-dividing plate. One enters into impeller through the center of material-dividing plate, be accelerated soon. The acceleration is hundreds of times than gravitational acceleration. Then the raw material is threw out from the three evenly distributed flow channels at the speed of 60-70m/s. The raw material first collides with the falling material and collides with the material liner in vortex cavity together. The raw material is rebounded by material liner and threw out to the top of the vortex cavity. The moving direction changes and deflects down. The material which is threw out from flow channels forms a continuous material liner. In this way, the material is hit, crashed and ground for twice or more times in vortex cavity. The crushed material discharges from outlet in the bottom. In the whole crushing process, the raw material is crushed by hitting with itself instead of with metal. The raw material hit, crash and crushed with material liner which reduce the pollution and extend the wear time. And the clever self-circulation of the airflow in vortex cavity eliminate dust pollution.
 

Technical Parameters:

 

Model Rotate speed of impeller (r/min) Max feed size (mm) Power (kW) Weight (including motor) (t) Capacity (t/h) Overall dimensions (mm)
PCL-600 2000-2600 30 2×30 5.6 10-30 2800×1550×2030
PCL-750 1600-2100 35 2×45 7.5 30-50 3300×1800×2440
PCL-900 1300-1700 40 2×55 12 50-80 3750×2120×2660
PCL-1050 1100-1450 45 2×110 16 70-120 4480×2450×2906
PCL-1250 950-1200 45 2×132 22 80-150 4563×2650×3176
PCL-1350 900-1200 50 2×160 26 120-200 5340×2940×3650

INQUIRY

if you have any questions,plese contact us,we will reply with in 24 hours!

* You Need:
* Your Name:
* Your Email:
* Country:
* Telephone:
* questions:

Contact US

For product information and pricing, Chat with sales agent: or Email Us: xsm@xsmcrusher.com
Tel: +86-21-33756878
Fax:+86-21-33908325

Get Price

Price of latest products

Share :